SUNNY HOME MANAGER 2.0

The new compact
Sunny Home Manager 2.0

Intelligent energy management is
now easier and more cost-effective

The Sunny Home Manager 2.0 monitors all energy flows in the home, automatically identifies potential savings and facilitates efficient use of solar energy. It makes intelligent energy management even easier and more cost-effective by combining the functions of the Sunny Home Manager Bluetooth and the SMA Energy Meter in a single device starting in April 2017.

Benefits

Intelligent energy management and power measurement in a single device

  • Lower system costs thanks to less components
  • Measure and control energy flows in the home based on predictive energy planning

Quick and easy installation

  • Plug-and-play configuration after installation in the switch cabinet
  • Easy installation saves time and costs

Future-proof communication lines

  • More intelligent loads integrated via standard interfaces EEBus and SEMP
  • Compatibility with cost-effective standard radio-controlled sockets facilitates control of simple loads

Monitor and Act

Understand your energy generation and consumption

  • Do you know how much energy is required to wash a load of laundry?
  • Do you know that your beloved refrigerator actually uses three times more energy than an A++ refrigerator?
  • Are you aware that on a sunny day, your PV system produces more energy than you actually can consume?

Being connected to all major household appliances, Sunny Home Manager 2.0 can tell you and allows you to adjust your consumption habits. This is the first step in reducing your energy bill and being more ecologically conscious by actually using energy when the sun provides it.


What Sunny Home Manager 2.0 has to offer

  • Clear visualization of key energy flows in the household
  • Energy balance diagrams which show PV generation, charging/discharging of the storage battery
  • Energy mix (electricity from photovoltaics, battery, utility grid) as used by individual household appliances
  • Historic energy consumption charts with various view selections
  • Basic PV system status monitoring to confirm correct system performance
SUNNY HOME MANAGER - Energy Balance

Energy Balance

The analysis page shows the energy balance for a specified time period and provides analyses for generation, consumption, self-consumption and battery usage.


Switch and Manage

Energy management with the SMA Smart Home automatically reduces your energy bill

Once you know where energy comes and goes in your home, you can let Sunny Home Manager 2.0 do what it is designed to do... manage energy.

Having access to all key household appliances, the optional battery-storage system and the PV generation unit, the Sunny Home Manager 2.0 always knows how much energy is available and where it is needed. Aided by a weather forecast from Internet data and individual adaptation to local conditions, it is able to accurately predict solar irradiation for a few hours into the future and supply the connected household appliances with low cost PV energy. Thanks to the Sunny Home Manager’s self-learning function, appliances such as the heat pump run exactly when there is sufficient sunlight available, making it possible to cover electric power demand by solar production.

The online Sunny Portal shows the status of the PV system and displays energy availability and consumption forecasts. It indicates the scheduled operating periods of the household appliances that Sunny Home Manager 2.0 factors into its energy planning. So you know that the washing machine will be finished at 4 p.m. and that the laundry will have been washed almost entirely using solar power. It also gives tips on how you could use additional excess PV energy.

The diagrams in the Sunny Portal display the power consumption for connected household appliances together so that you can see exactly when Sunny Home Manager 2.0 started the dishwasher or how much solar power the heat pump used over the past month.


The Ideal Partner for Professional Monitoring

Sunny Portal Professional Package for more system details and better performance

The combination of the Sunny Portal Professional Package and Sunny Home Manager 2.0 is ideal for professional monitoring of systems in the 5 kWp to 50kWp power range. Users can also read the inverter's most relevant DC and AC measured values and pull up information about power and yield. With the Sunny Portal Professional Package, system information is displayed at 5-minute resolution, therefore offering even greater detail. PV system operators can analyze their daily energy use even more accurately using the detailed energy balance data and can learn about their consumption patterns.

Sunny Portal Professional Package Monitoring

Saving Energy Intelligently

Managing household appliances

radio-controlled sockets

Particular energy savings can be made by allowing Sunny Home Manager to schedule distribution of solar power among the household appliances. The biggest savings can be made when the system takes control of the largest electrical appliances in the home. SMA offers a number of solutions that allow Sunny Home Manager to access appliances:

Switch appliances on and off
The Sunny Home Manager 2.0 works with select WLAN radio-controlled sockets from the online shop (see Accessories).

These radio-controlled sockets switch appliances on and off using control signals from the Sunny Home Manager 2.0. The Sunny Home Manager 2.0 measures power consumption levels and records exactly how much power the device has used and for how long.

A variety of appliances can be controlled via the energy management system, including washing machines, dishwashers, dryers, immersion heaters, pumps and many more.
Radio-controlled sockets are available in various country-specific versions. You can find more information in our SMA Smart Home planning guidelines (available in April 2017).

Smart Appliances With Direct Data Connection

The household of the future is completely interconnected. SMA has already partnered with a few manufacturers to develop major household appliances that work with the Sunny Home Manager in automatically managing household energy:
For example, after simple plug-and-play installation,  an intelligent heat pump automatically coordinates with the Sunny Home Manager 2.0 to find the best time to heat the house with solar energy.

SMA Smart Home Partners

  • Stiebel Eltron heat pumpsor
    Compatibility list see Planning Guidelines - SMA Smart Home (available in April 2017)
  • MENNEKES AMTRON® wall charging stations (Premium/Xtra models)
  • Household appliances with the EEBUS communication standard (e.g., Bosch-Siemens household appliances)


More and more controllable devices will be added with the EEBUS communication standard for energy efficiency. Each manufacturer will supply detailed information on compatible appliances and setup.

SMA Smart Home Partners

Storing Energy Intelligently

Store energy when it’s the most worthwhile

Sunny Home Manager 2.0 - Storing Energy Intelligently

The active power limitation policy in Germany forces PV systems with battery storage to curtail PV inverter power output when more than 50% of the installed PV power (kWp) is fed into the utility grid.

With its PV yield forecast and measurement of household consumption, the Sunny Home Manager 2.0 knows precisely when it needs to limit grid feed-in, for example at midday. After all, even though on sunny days as much as 100% PV power may be available, if there is no one at home to use this energy, everything over 50% has to be discarded.

To be able to use valuable PV power, it is best to store the otherwise discarded energy in a battery. You can use this practically free energy in the evenings to operate television or prepare a meal.

For such purposes, the Sunny Home Manager 2.0 always ensures that there is enough capacity left in the battery. Instead of charging the battery with excess PV power first thing in the morning, the Sunny Home Manager 2.0 controls the battery inverter to make sure as much PV energy as possible is curtailed during the midday peak so it can be stored in the battery.

Maximizing use of low cost PV power helps reduce energy costs.

Read more about SMA storage solutions.

Version = 2.1.3.R (August 2017)

Performance features:

  • Update process improvement to fix unstable Internet connection

Version 2.1.2.R (June 2017)

Performance features:

  • Improvement of the connection for program-controlled loads in automatic mode in a proper temporal sequence.

Version = 2.1.1.R (May 2017)

New features:

  • Support of WLAN RC socket SP-2101W from Edimax. Now including the firmware version 2.08 additionally to the already supported firmware version 2.03.
  • Support of the integrated SMA Smart Connected feature of SB3.0 / 3.6 / 4.0 / 5.0-1AV40.

Version >= 2.0.6.R (April 2017)

Performance features:

  • New hardware: Sunny Home Manager 2.0 (HM-20)
  • Successor of Sunny Home Manager Bluetooth (HM-BT-10).
  • Two products in One: Incorporates an integrated energy meter up to 63 A (> 63 A via current transformers),
    Standard application: Power measurement at grid connection point (grid supply/ feed-in), no additional SMA Energy Meter required
  • All well-established energy management features of firmware version 1.13.14.R of the previous Sunny Home Manager Bluetooth
  • Support of WLAN RC socket SP-2101W from Edimax, available via electronics wholesalers in various country versions
    (up to firmware version 2.03, from firmware version V2 v1.00 available from May 2017 via Edimax update process)
  • As a difference to Sunny Home Manager Bluetooth (HM-BT-10), Sunny Home Manager 2.0 (HM-20) does NOT support:

    • No Bluetooth devices (SMA Bluetooth RC sockets, Bluetooth connections to SMA inverters)
    • No S0/D0 power meters
    • No Plugwise components
    • No Miele@home appliances

Version 1.13.14.R (August 2016)

Performance features for the SMA Smart Home System:

Energy Management for Bosch/Siemens home appliances via EEBUS

  • Integration of EEBUS compatible Bosch/Siemens home appliances in Sunny Home Manager energy management.
  • Simple process to establish the EEBUS data connection between Sunny Home Manager and EEBUS compatible Bosch/Siemens dishwashers, washers and tumble driers.
  • Increased PV self consumption and reduction of energy cost through EEBUS controlled load shifting.
  • EEBUS is available for all appliance manufacturers as an open standard. In the near future more smart appliances will join in the EEBUS connected smart home.
  • A separate technical information with detailed description for connection and control via EEBUS will be available (Download via www.sma.de).
  • Please note: For detailed instructions in regards to EEBUS compatible Bosch/Siemens home appliances please contact the Bosch/Siemens service line.


Battery Charge Time Window control – you decide, when your batteries shall be charged.

  • Applicable specifically for home owners who get a time-of-use tariff from their power company.
  • Charge your battery with low cost power and use the stored energy in times, when grid power is high in price.
  • Definition of time windows, where batteries shall be charged at a defined charge power.
  • Available for AC coupled SMA storage battery systems (Sunny Island or Sunny Boy Storage).
  • A separate Technical Information with detailed explanations and application samples will be available for download from www.sma.de.


Zero Export control for PV systems with AC coupled storage batteries.

  • ... up to now, Zero Export was supported for PV systems with inverters only.
  • Inclusion of AC coupled storage batteries in Zero Export control. This enables you to use an optimum amount of your self generated PV energy.
  • A default waiting cycle of 5 seconds allows the battery inverter to use excess PV power for charging before the PV inverter output is scaled down to avoid grid feed-in.
  • Available for AC coupled storage battery systems (Sunny Island or Sunny Boy Storage and other battery storage systems).
  • Please note: In Zero Export mode, a minimum level of power feed-in cannot be avoided. The amount of feed-in depends on the number of household load changes and composition of the PV system.


If you have activated the automatic software update function for the Sunny Home Manager, the update will be performed without any user interaction. In case you want to initiate the update manually, please temporarily activate the automatic update function. After successful completion of the update, you can revert to the deactivated state of automatic update function. Please note, that the update is processed step-by-step. Multiple Sunny Home Managers are updated one after another.

Version 1.12.17.R (July 2016)

Extensions for the SMA Smart Home system:

  • Support of the new Sunny Boy Storage (Single unit with one high voltage storage battery) for prognosis-based battery charging and visualisation of storage data.
    For detailed information about Sunny Boy Storage please refer to the product information page at www.sma.de.


If you have activated the automatic software update function for the Sunny Home Manager, the update will be performed without any user interaction. In case you want to initiate the update manually, please temporarily activate the automatic update function. After successful completion of the update, you can revert to the deactivated state of automatic update function. Please note, that the update is processed step-by-step. Multiple Sunny Home Managers are updated one after another.

Version 1.12.11.R (October 2015)

Extensions for the SMA Smart Home system:

  • New RC sockets and RC switches available through integration of Plugwise home automation components (Plugwise Circle, Sting and Stealth)
    SMA Bluetooth RC sockets still are available. In regards to energy management functionality, SMA Bluetooth RC sockets and Plugwise RC sockets are identical.

    • For compatibility of the Plugwise components, the Plugwise base station Stretch needs to have a minimum firmware version 2.7.7 (see further notes below).
    • To connect the Sunny Home Manager with the Plugwise components, please find a description in the Quick Reference Guide or in the new version of the Planning Guidelines "SMA Smart Home".
    • ON/OFF control and enabling the Auto-Mode for Plugwise RC sockets is done via Sunny Portal or the Sunny Portal App. (no control button for Plugwise RC sockets). Setup of the basic Plugwise system is described in Plugwise's device documentation.

  • SMA provides a new SMA Appliance Control Set containing 4 Plugwise RC sockets Circle and the base station Stretch in 4 country versions (Start of delivery will be announced). The set comprises the correct firmware versions for full compatibility with the Sunny Home Manager system.
  • New features for energy management of Smart Appliances with control via direct data connection (variable load appliance)

    • Mennekes Amtron charge stations are controlled with power level recommendations. (Amtron Firmware minimum version 1.07, update process acc. to Mennekes instruction manual). With this feature, it is possible to consume excess PV energy to an extremely high degree independent from a changing weather situation.
    • Stiebel Eltron heatpumps (with WPM 3 and LWZ) are controlled via plug&play via direct data connection in the local area network.

  • Full support of lead acid storage batteries (FLA) for prognosis based storage management. With this extension, all available battery types can be controlled in energy management.
  • Miele appliances in the Miele@home system with base station XGW3000 or XGW2000 are fully supported in energy management.


New documentation and application support:


New features in Sunny Portal for Sunny Home Manager PV plants:

  • In Sunny Portal section "Overview of New Device" it now is possible to transfer multiple new devices to the PV plant. In comparison with the one-by-one transfer method, this significantly saves time during plant setup.
  • Sunny Portal Apps now are available in a new version with simplified operation of appliances and other new features. (iOS and Android versions available)
  • Various bug fixings


Note:

  • Update of Plugwise Stretch: The update commands are triggered via the Stretch's HTML Interface, which can be entered via the Plugwise App (please refer to the Plugwise documentation).
  • Safety status of RC sockets during communication disturbance: Besides On/OFF so far, there was another state "keep last known status". Due to potential safety hazards, this state is not supported anymore for new load profiles. Existing load profiles, which used this state, will be transitioned to a new setting with the next active change of the load profile. With the change, only the states "ON" or "OFF" can be selected.
  • If you have activated the automatic software update function for the Sunny Home Manager, the update will be performed without any user interaction. In case you want to initiate the update manually, please temporarily activate the automatic update function. After successful completion of the update, you can revert to the deactivated state of automatic update function. Please note, that the update is processed step-by-step. Multiple Sunny Home Managers are updated one after another.

Version 1.11.4.R (January 2015)

Performance features:

  • Support of Zero Export Control (0% Feed-in)
  • Realisation of residential PV Systems for 100% self-consumption
  • According to measured PV generation and household consumption levels, SMA PV inverters are dynamically controlled to avoid any feed-in of PV power into the grid.
  • Complies with regional requirements by grid operators/power companies (i.e. in Australia/Spain/Chile)
  • This version does not yet support battery inverters (SunnyBoy Smart Energy/Sunny Island or other manufacturers).


Energy management for large appliances via relay control

  • Example: Control of heat pumps with control input (SG-Ready) and heater elements
  • Remote-controlled-socket switches appliance via a relay or contactor (single-/three-phase)
  • Power consumption is fixed in load/appliance profile
  • Correct consideration for operation planning and display
  • For this feature, the BT RC socket firmware will be automatically updated to version 12.12.113.R.


Notes:
If you have activated the automatic software update function for the Sunny Home Manager, the update will be performed without any user interaction. In case you want to initiate the update manually, please temporarily activate the automatic update function. After successful completion of the update, you can revert to the deactivated state of automatic update function. Please note, that the update is processed step-by-step. Multiple Sunny Home Managers are updated one after another.

Version 1.10.11.R (September 2014)

Performance features:
More efficient use of energy through optimized storage management for Sunny Island

  • Reduction of derating losses through use of forecast excess energy from dynamic active power limitation to charge the battery. The required firmware version for Sunny Island: 3.100 (in the case of earlier firmware versions, the normal Sunny Island mode will resume without taking Sunny Home Manager control into account)

 

Improved information as a result of fundamental optimizations of visualization and load definition

  • Storage of historical consumption data using independent load profiles (automatic migration in the case of existing PV systems)
  • Clear information at a glance with visualization of energy mix
  • Display of time periods with switching points and load information
  • Display of current scheduling of loads for the day
  • New load, "Heating element"

 

Greater control in the SMA Smart Home through integration of Smart appliances

  • Data protocol via Ethernet e.g. for heat pumps, white goods and charging stations for electric vehicles
  • Automatic recognition of Smart appliances in the home network
  • Display of all loads in the load balance diagrams

 

Extension of load configuration for controlling via SMA radio-controlled sockets

  • Increased flexibility through weekday-based programming of time periods
  • Easier operation through automatic start-up detection for program-controlled loads

 

Notes:
If you have activated the automatic software update function for the Sunny Home Manager, the update will be performed automatically. In case you want to initiate the update manually, please temporarily activate the automatic update function. After successful completion of the update, you can revert to the deactivated state of automatic update function.Please note, that the update is processed step-by-step. Multiple Sunny Home Managers are updated one after another.

Version 1.08.10.R (June 2014)

Performance features:
Only necessary SMA-internal adjustments were implemented, which do not affect any functional features visible to the user.

Notes:
If you have activated the automatic software update function for the Sunny Home Manager, the update will be performed automatically. In case you want to initiate the update manually, please temporarily activate the automatic update function. After successful completion of the update, you can revert to the deactivated state of automatic update function.
Please note, that the update is processed step-by-step. Multiple Sunny Home Managers are updated one after another.

Note:
Cancellation of info page display in the public section of Sunny Portal (from Version 7.2. Deployment date 15.07.2014): The pages „Energy balance“ and „Load balance“ cannot be approved for display in the public section of the Sunny Portal anymore. Page display, which previously was approved, is revoked without separate note to the user.
This decision was taken due to data-security and safety-relevance reasons. Displayed data could be mis-used in order to control the presence of home owners: Risk of burglary and breach of privacy, etc. ...

Version 1.08.8.R (April 2014)

Performance features:

Support of Sunny Boy Smart Energy
The new Sunny Home Manager firmware Version 1.08. fully supports the Sunny Boy Smart Energy within the Integrated Storage System (ISS).

  • For further optimization of the self-consumption rate, the new load management system specially controls charging and discharging of the Sunny Boy Smart Energy’s integrated battery storage.
  • Controlled usage of the excess peak PV energy, which otherwise would be lost due to the 70%/60% active power feed-in limitation. Instead of dumping this excess energy, it is possible to charge the Sunny Boy Smart Energy’s battery with free-of-cost energy.

For further details about the Integrated Storage System:

  • Product page ISS
  • Planning Guideline SMA Smart Home (currently only in German, English will be available from June 2014)

Further features and corrections:

  • With an activation of the automatic update function of the Sunny Home Manager, also the automatic update of the radio-controlled sockets is initiated. It is now secured, that all components of the system are correctly updated to the most recent firmware version.
  • In case of a device- or meter-replacement within the Sunny Home Manager system, the occurrence of data inconsistencies in the energy reports is avoided.

Notes:
If you have activated the automatic software update function for the Sunny Home Manager, the update will be performed automatically. In case you want to initiate the update manually, please temporarily activate the automatic update function. After successful completion of the update, you can revert to the deactivated state of automatic update function.
Please note, that the update is processed step-by-step. Multiple Sunny Home Managers are updated one after another.

Version 1.07.x.R (January 2014)

Performance features:

Support of further load types:
With the new version of the Sunny Home Manager, you can also select the load types "Stiebel Eltron WWK 300" and "Tecalor TTA 300" in the radio-controlled socket configuration.

This means that all device-relevant properties are set directly and the user does not have to make any further settings. Also, with these two load types, certain properties cannot be changed (e.g. the minimum switch-off time) in order to guarantee safe operation.

Furthermore, both of these load types are only switched off by the Sunny Home Manager at the end of a time window if they are in standby operation. This ensures that operation continues long enough for water heating.

If you have activated the automatic software update function in the Sunny Home Manager, the update will be performed automatically. Otherwise, you can reactivate the automatic update function short-term - the update will then be performed. Afterwards you can deactivate the automatic update function again.

Please note, the update of this version occurs gradually, so that each Sunny Home Manager is not updated at the same time.

Version 1.06.x.R (August 2013)

Performance features:

Support of optional loads - The new version of the Sunny Home Manager allows for a variably adjustable load control which makes it possible to operate devices purely with PV energy or even with surplus PV energy (which is not allowed to be fed into the electricity grid). With this, each time period can be configured in such a way that the load must run in all cases and is optimally scheduled (as previously) or only runs when certain conditions are met, for example when sufficient PV energy is available.

Grid management service via Ethernet-based communication - In order to satisfy the conditions for KfW aid (Kreditanstalt für Wiederaufbau - German Development Loan Corporation) for battery storage systems in Germany, the Sunny Home Manager has an Ethernet-based interface. This can be used to limit the active power feed-in or to change the reactive power settings of the PV plant remotely.

General optimizations and error corrections - Further optimization and stabilization measures have been made in Sunny Portal and the firmware 1.06.x.R. It is now possible, for example, to carry out the configuration of the SMA radio-controlled sockets as "standard user". Therefore it is no longer necessary to be logged in as "Installer" for these settings. Also, the forecast has been improved and now allows for the displaying of the generation forecast in all countries.

Information: the version 1.05.x.R is an unpublished version - therefore there is a jump to version 1.06.x.R.

If you have activated the automatic software update function in the Sunny Home Manager, the update will be performed automatically. Otherwise you can reactivate the automatic update function short-term - the update will then be performed. Afterwards you can deactivate the automatic update function again.

Version 1.03.x.R (December 2012)

Performance features:

Limitation of the active power feed-in
- The grid operator may require a permanent limitation of the active power feed-in for your PV plant, i.e. limiting of the active power being fed into the electricity grid to a fixed value or to a percentage of the installed nominal plant power. The Sunny Home Manager monitors the active power being fed into the electricity grid via a feed-in meter. If the active power feed-in exceeds the prescribed limit, the Sunny Home Manager limits the inverter PV generation via Bluetooth®. The Sunny Home Manager prevents yield losses due to unnecessarily strong limitation of PV generation by taking the current self-consumption of the household into consideration.

Presentation of the prognoses
- with immediate effect, presentation of the PV generation prognosis, the weather forecast and the consumption prognosis is available for countries in Europe and Australia.

New menu page "analysis" in Sunny Portal - here, without additional configuration, the most important data and events of the plant will be presented and evaluated for the user. In addition, he will be actively supported via a flexible and intuitive operable user interface.

General optimizations and error corrections - Further optimization and stabilization measures have been made in Sunny Portal and the Firmware 1.03.x.R.

If you have activated the automatic software update function in the Sunny Home Manager, the update will be performed automatically. Otherwise you can reactivate the automatic update function short-term. The update will then be performed. Afterwards you can deactivate the automatic update function again.

Version 1.02.7.R (August 2012)


Performance features:

Automatic Update of Connected Devices
- With immediate effect, devices connected to the Sunny Home Manager can be kept up to date with the latest firmware via Bluetooth. This can save time and costs, since updates can be performed without having to be on site at the PV plant. This function can be activated in Sunny Portal by visiting the "Device Properties" page of the Sunny Home Manager and activating the "Automatically Update Software" function for PV plant devices.

Sunny Home Manager Update
- This function has been optimized so that downloading of the new firmware can be performed more reliably in the event of poor or slow internet connections.

General Optimizations and Error Corrections - Further optimization and stabilization measures have been made in Sunny Portal and the Firmware 1.02.7.R.

Version 1.01.0.R (May 2012)


Performance features:

Device support update - The SMA Bluetooth Piggy-Back Off-Grid* is supported by the new firmware 1.01.0.R. As a result the Sunny Home Manager and the Sunny Backup Set S* can be used together for increased self-consumption.

General optimization and elimination of errors - the firmware 1.01.0.R optimizes and stabilizes existing functions.


*The Sunny Backup Set S and the SMA Bluetooth Piggy-Back Off-Grid are currently only available in Germany.

WLAN radio-controlled socket

Compatible radio-controlled socket
Edimax SP-2101W WLAN radio-controlled socket

This WLAN radio-controlled socket disconnects the loads and measures power consumption levels, and is generally available in the online shop. Once the radio-controlled socket is registered via the Edimax App in the local area network, it will be displayed as a new device in Sunny Portal and can be added to the PV system with the Sunny Home Manger 2.0 (see Sunny Home Manger 2.0 user manual).

Note: The Sunny Home Manager 2.0 is ONLY compatible with the Edimax SP-2101W WLAN radio-controlled socket. Other WLAN radio-controlled sockets from Edimax or another manufacturer cannot currently be controlled by the Sunny Home Manager 2.0.

For compatibility of the Edimax WLAN RC socket SP-2101W with Sunny Home Manager 2.0, the following conditions in regards to applicable firmware versions need to be considered:

  • Sunny Home Manager 2.0 firmware from version 2.0.6.R
  • Edimax SP-2101W firmware up to version 2.03
  • Edimax SP-2101W firmware from version V2 v1.00 (available from May 2017 via the Edimax update process)


Note:
For the Edimax SP-2101W WLAN RC socket, intermediate firmware versions between version 2.03 and V2 v1.00 are not compatible with Sunny Home Manager 2.0. Hence, neither control nor power metering is possible via the Edimax SP-2101W WLAN RC socket with Sunny Home Manager 2.0.

From May 2017, Edimax SP-2101W WLAN RC sockets with the specified intermediate firmware versions can be updated to firmware version V2 v1.00 via the Edimax update process (refer to the Edimax App and documentation). A downgrade to firmware version 2.03 is not possible.

SMA Energy Meter

SMA Energy Meter

A measuring device is integrated into the Sunny Home Manager 2.0 that is used in the standard configuration to measure the feed-in power and purchased power at the grid connection point. To record the data of power generation capacity of the third-party inverters, an additional SMA Energy Meter has to be used (see Sunny Home Manager 2.0 user manual).

Note: SMA Energy Meter versions 10 and 20 are compatible with the Sunny Home Manager 2.0.

Language

PC Software

SUNNY HOMEMANAGER ASSISTANT 1.0.4 - for WINDOWS Sunny-Home-Manager-Assistant-1.0.4.R.exe
  • Type: PC Software
  • Language: International
  • Number: Sunny-Home-Manager-Assistant-1.0.4.R
  • Version: 1.0.4
SUNNY HOMEMANAGER ASSISTANT 1.0.4 - for LINUX and MacOS Sunny-Home-Manager-Assistant-1.0.4.R.jar
  • Type: PC Software
  • Language: International
  • Number: Sunny-Home-Manager-Assistant-1.0.4.R.jar
  • Version: 1.0.4

Operating Instructions

Operating Manual - SUNNY HOME MANAGER 2.0 HM-20-BE-en-11.pdf
  • Type: Operating Instructions
  • Language: English (Worldwide)
  • Number: HM-20-BE-en-11
  • Version: 1.1

Planning guidelines

Planning Guidelines - SMA SMART HOME - The System Solution for Greater Independence SI-HoMan-PL-en-50.pdf
  • Type: Planning guidelines
  • Language: English (Worldwide)
  • Number: SI-HoMan-PL-en-50
  • Version: 5.0

Technical information

Technical Information - SMA SMART HOME - Load Control via MUST Time Period - Example: Washing Machine SSH_MUSS-Zeitfenster-TI-en-11.pdf
  • Type: Technical information
  • Language: International
  • Number: SSH_MUSS-Zeitfenster-TI-en-11
  • Version: 1.1
Technical Information - SMA SMART HOME - Load Control via CAN Time Period - Example: Pool Pump SSH_KANN-Zeitfenster-TI-en-11.pdf
  • Type: Technical information
  • Language: International
  • Number: SSH_KANN-Zeitfenster-TI-en-11
  • Version: 1.1
Technical Information - SMA SMART HOME Load Control Using Relays or Contactors - Example: Heating Rod SSH_Verbraucher_m_Relais-TI-en-11.pdf
  • Type: Technical information
  • Language: International
  • Number: SSH_Verbraucher_m_Relais-TI-en-11
  • Version: 1.1
Technical Information - SMA SMART HOME Home - appliance energy management using EEBus SmartHome_EEBUS-TI-en-11.pdf
  • Type: Technical information
  • Language: International
  • Number: SmartHome_EEBus-TI-en-11
  • Version: 1.1
Technical Information - SMA SMART HOME - Battery Charging Management with Time-of-Use Energy Tariffs SmartHome_Time-of-use-TI-en-11.pdf
  • Type: Technical information
  • Language: International
  • Number: SmartHome_Time-of-use-TI-en-11
  • Version: 1.1

Data sheet

SUNNY HOME MANAGER 2.0 - The control center for smart energy management HOMEMANAGER-DEN1711-V30web.pdf
  • Type: Data sheet
  • Language: International
  • Number: HOMEMANAGER-DEN1711-V30
  • Version: 3.0

Manufacturers Declaration

EU Declaration of Conformity - SMA Energy Meter (EMETER-20, EMETER-20.GR1) / Sunny Home Manager 2.0 (HM-20, HM-20.GR1) ZE_CE_EMETER-20_HM20_en_10.pdf
  • Type: Manufacturers Declaration
  • Language: English (Worldwide)
  • Number: ZE_CE_EMETER-20_HM20_en_10
  • Version: 1.0
Manufacturer’s Declaration - Zero Feed-in Mode (Zero Export) for PV Systems HK_Zero-Export-fuer-PV-Anlagen_en_12.pdf
  • Type: Manufacturers Declaration
  • Language: International
  • Number: HK_Zero-Export-fuer-PV-Anlagen_en_12
  • Version: 1.2

Quick reference guide

Quick Reference Guide - SUNNY HOME MANAGER 2.0 HM-20-IS-en-10.pdf
  • Type: Quick reference guide
  • Language: International
  • Number: HM-20-IS-en-10
  • Version: 1.0

Installation Guide

System description - SMA FLEXIBLE STORAGE SYSTEM - Increased self-consumption with SUNNY ISLAND 4.4M / 6.0H / 8.0H and SUNNY HOME MANAGER SI44M-80H-12-FSS-IA-en-10.pdf
  • Type: Installation Guide
  • Language: English (Worldwide)
  • Number: SI44M-80H-12-FSS-IA-en-10
  • Version: 1.0
System description - Off-Grid Systems with SUNNY ISLAND 4.4M / 6.0H / 8.0H SI44M-80H-12-OffGrid-IA-en-10.pdf
  • Type: Installation Guide
  • Language: English (Worldwide)
  • Number: SI44M-80H-12-OffGrid-IA-en-10
  • Version: 1.0